How to Download and Install VAG CAN Pro 5.5.1 Software for VW/Audi/Seat/Skoda
How to Download and Install VAG CAN Pro 5.5.1 Software for VW/Audi/Seat/Skoda
VAG CAN Pro 5.5.1 is a professional diagnostic interface for VW/Audi/Seat/Skoda vehicles that supports CAN BUS+K-line+UDS diagnosis and programming. It is an inexpensive flasher that can handle various tasks such as coding, adaptation, service reset, DPF regeneration, immobilizer programming, and more. In this article, we will show you how to download and install VAG CAN Pro 5.5.1 software on your Windows XP or Windows 7 computer.
Vag can pro 5.5 1 software download
Step 1: Download VAG CAN Pro 5.5.1 Software
You can download VAG CAN Pro 5.5.1 software from the link below:
VAG CAN Pro 5.5.1 Software Free Download
The file size is about 400 MB and it is a zip file. You need to extract it to a folder on your computer.
Step 2: Install VAG CAN Pro 5.5.1 Software
Before installing VAG CAN Pro 5.5.1 software, you need to disable your antivirus software and internet connection, as they may interfere with the installation process.
Then, follow these steps to install VAG CAN Pro 5.5.1 software:
Open the folder where you extracted the zip file and run the setup.exe file.
Select your language and click Next.
Accept the license agreement and click Next.
Choose the destination folder and click Next.
Click Install and wait for the installation to complete.
Click Finish and restart your computer.
Step 3: Connect VAG CAN Pro 5.5.1 Interface to Your Computer
After installing VAG CAN Pro 5.5.1 software, you need to connect VAG CAN Pro 5.5.1 interface to your computer via USB port.
If you use Windows XP system, the driver will be automatically installed.
If you use Windows 7 system, you need to manually install the driver by following these steps:
Go to Device Manager and find the device named USB Serial Port under Other devices.
Right-click on it and select Update Driver Software.
Select Browse my computer for driver software.
Select Let me pick from a list of device drivers on my computer.
Select Ports (COM & LPT) and click Next.
Select FTDI from the manufacturer list and FT232R USB UART from the model list and click Next.
Click Yes if prompted by Windows Security warning.
Click Close when the driver installation is done.
You should see a new device named USB Serial Port (COMx) under Ports (COM & LPT) in Device Manager, where x is the COM port number assigned to your interface.
Step 4: Run VAG CAN Pro 5.5.1 Software
To run VAG CAN Pro 5.5.1 software, you need to open the folder where you installed it and run the file named VCP.exe.
You will see the main interface of VAG CAN Pro 5.5.1 software as below:
You need to select the COM port number that matches your interface in the top right corner of the software.
You also need to select the vehicle model and type from the drop-down menus on the left side of the software.
Then, you can click on the buttons on the bottom of the software to access different functions such as Diagnosis 0efd9a6b88